A simple melt and pour deodorant with a vegetable protein the converts the enzymes of odor into a simple salt. A great alternative to commercial offerings.
Be one of the first to offer a gelled deodorant stick with easy melt and pour properties. A vegetable protein commonly used in food and hospital facilities, neutralizes the enzymes that cause odor to a simple salt. Free of aluminum or bacteriacides that have been a concern with long term use. This vegetable based deodorant is both effective and an alternative to those commercial products.
Ingredients: Propylene Glycol, De-Ionized Water, Sodium Stearate, Vegetable Protein, PEG-200/Hydroginated Castor Oil, Isosteareth-2, Salicylic Acid, Steareth-100 Chamomilla Recutita (Matricaria) Flower Extract (Chamomile), Aloe Barbadensis ( Aloe Vera) Leaf Juice, EDTA
Preservatives : Citrus Grandis (Grapefruit) Seed Extract, Diazolidinyl Urea, Iodopropynyl Butylcarbamate @ 0.3%
DIRECTIONS:
Although a double boiler works well and is more controllable, you can microwave up to 1 pound on a medium-high setting. Use only microwave safe plastic as other types might break down or even melt. If your microwave does not have a turntable, watch that you do not heat one side for too long as the product will heat on one side with a chance you can melt the container. (even if it is microwave safe). Do not leave unattended or within reach of children!
If you want color, water based FD&C (LIQUID CLEAR CONCENTRATES), certain Pigments and Mica will work, although there can be a tendancy for "dropout" or sedement settling to the bottom.
Before you Start
Pots or a double boiler, thermometer, ladle, rubber spatula for stirring, glass or plastic pitcher and a scale (optional), deodorant containers.
1) Find two pots where one will fit inside the other (about a 1/2 gallon or larger, plus a lid).
2) Fill the bottom pot with water till the inner pot starts to float
3) Place the Vegetable Deodorant into the pot and set your burner to medium.
4) Items will melt in 1/2 an hour, if you have a thermometer, check temperature. Heat to 45-50c / 110-120f. Do not boil!
5) Add your colors (if selected) and mix thoroughly. Pour a small amount into a clear container and wait for it to set for 20-30 minutes. You will notice the colors tend to lighten as the product goes slightly opaque. As the base product also has a slight yellow shade, it will affect tones.
6) Add fragrance or essential oils (if chosen). Typically, 1 tablespoon (1/2oz-15ml or 0.8%) for each 64oz/1.8Kg is enough. Strength will vary on the type of scent and your preferences.
7) Pour into your choice of containers.
Tip
If bubbles exist around the outside rim of the container, you can mist some rubbing or isopropyl alcohol while freshly poured. The bubbles will dissapear and the alcohol burns off.
