How to Make M&P Soap on a Rope

In this tutorial you will learn how easy and fun it is to make your own professional M&P soap on a rope, using our two-part 3D molds which are perfect for this process.

Soap on a Rope fits conveniently around shower faucet or handles. Soap dries faster, and lasts longer

It's also a great product for anyone with mobility problems, as you can hang the soap over your arm while you bathe or shower

Supplies You Will Need
  • Two-Part 3D Soap Mold
  • Soap Rope
    • 18" in length (or longer)
    • Approx. 1/4" in Diameter
    • Heat sealed or knotted at the ends.
  • M&P Soap Base
  • Fragrance or Essential Oil
  • Optional: Colorant
Measure Your Rope

Measure the length of rope necessary to embed the rope half-way into the bar, to the top of the funnel

Prepare Your Mold

Lower the heat sealed end of the rope into the mold cavity, through the funnel, and tuck the remaining rope under the top rubber band

Center the rope in the funnel (left to right), and make sure that the rope is hanging straight into the mold cavity

Pour Your Soap

After preparing your soap base, pour the soap slowly and steadily into the mold

Overfill the mold cavity by pouring an excess into the funnel. This will act as a reserve and eliminate any large air pockets from forming at the top of the bar

Lightly tap the mold onto the table to release any trapped air, and if necessary, refill the funnel reserve

Finishing Your Soap on a Rope

Unmold the soap when it is ready, and trim away any excess material or "flashing" from the bar, and around the rope

This completes the Melt & Pour Soap on a Rope Tutorial. Thank you for your interest

Earn Rewards!